Note: There are two motors available for the AH-Sun Circle or Sun Twist Light Mover depending upon the year that you purchased the original light mover. Both motors will work. The difference is in the holes drilled for attaching the motor to the light mover.
There are two alignment holes which would need to be drilled out if the replacement motor you purchase now is not the same one as the original motor.
|
A Grainger motor for AH-Sun Circle light movers purchased or built prior to 1998 requires oiling occasionally for proper maintenance. $126.95
- Motor Ref No: 2736
-
HGM-4007-1 Dayton 3M096
-
120V 60HZ .5A 7 RPM
- (needs to be oiled)
|
|
A Hurst motor for AH-Sun Circle light movers built after 1998 does not require oiling and is a little bit faster. $134.95
- Model SA P/N 4002-008
-
6RPM 115V 60HZ 1/2W
The Hurst motor is a direct replacement for Sun Circle and Sun Twist light rotators manufactured in 1998 or later. It runs at 16 rph and does not need to be oiled. Complete installation instructions are included.
|