PRODUCTS
RC-Light Rail 3.5 system
The 6 foot rail can be expanded and has adjustable switch stops, to enable various travel lengths.

The Light Rail 3.5 Intelli Drive travels at approximately 2 feet per minute. The adjustable Intelli Drive time delay feature enables your lamp to pause at each end of the track for 0-60 seconds.

Simply mount the standard 6 foot track over the desired area and place the lamp-moving drive motor onto the track. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden.

Moving one light on a 6 foot rail should increase your light's area of coverage by approximately 1.6. This translates into lower operating cost due to higher single light yields. The lumens produced by a grow light decrease the greater the distance from the bulb. To avoid plant killing heat associated with stationary grow lights, the bulb must be kept at a greater distance from the plants. Moving the bulb allows you to place the bulbs closer to the plants because the heat generated by the bulb is spread out over a larger area, thus getting more benefit from the available light.

An Add-a-lamp kit is available that allows you to expand the system from 6' to 12', moving two reflectors in-line with one motor.

Light Rail 3.5 Intelli Drive features are:
  • Instrument grade drive motor totally sealed from the environment and runs on only 5 watts.
  • Self clutch drive design with automatic traction control.
  • Lightweight, easy to install, extendable 6' aluminum track.
  • Heavy duty carrier wheels
  • Capable of carrying up to 50 pounds of reflectors
The Light Rail 3.5 system includes:
  • LS152 Light Rail light mover 3.5 motor
  • LS151 Light Rail light mover 3.5 Track. 6 Feet in length.
  • LS156 Robo Stick stabilizer bar for all of the Light Rail light mover. Reduces reflector swing as the mover stops.
What makes this unit shine is the adjustable 0 - 60 second time delay when the lamp reaches a switch stop. This useful feature minimizes the 'tee-pee' growth phenomenon caused by the plants under the center of the track receiving twice as much light as those on the ends. By allowing an adjustable pause at the ends, the plant canopy is kept more even over the growing area.

See Hydroponics Lighting for additional information on the advantages of a Light Mover.

Note: Shipments made only within continental US, Alaska or Hawaii. Extra shipping charges may apply for Alaska or Hawaii residents. Please email support@hydroponicsfarming.com before ordering.

Item RC-LightRail3-5-system
Price: $218.85






Proceed to checkout
Continue shopping



 
website advertising by Mobile Penguins website advertising by Mobile Penguins